Display Messages - Saeco NEXTAGE CAP010 Mode D'emploi Et D'entretien

English
The figure shows the "Cappuccino" brewing screen.
If an anomalous condition
occurs during the brewing
phase, e.g. a fault or a
product
message with the causes of
the block is displayed.
Special messages
signals are indicated in
chapter "Troubleshooting".
94
shortage, a
and
9.3

Display Messages

When one or more alarms occur, the relevant beverages
are disabled and cannot be selected for the brewing.
If a disabled beverage is pressed a timed pop-up window
appears for 3 seconds, indicating which current alarm has
disabled the beverage.
Here below the list of the alarms displayed is reported,
along with the machine conditions that release them.
Temperature sensor alarm
Consequence: All the beverages for which the coffee
phase is required are disabled.
Message upon touching: "Temperature sensor alarm".
Pressure sensor alarm
Consequence: All the beverages for which the water phase,
the milk phase or the steam phase is required are disabled.
Message upon touching: "Pressure sensor alarm".
Coffee grinder 1(2) blocked
Consequence: If the selected coffee grinder is blocked all
the beverages for which the coffee phase is required are
disabled; if the blocked coffee grinder is not the selected
one, the error has no consequences.
Note: In machine models which allow for the coffee bean
hoppers to be used alternatively, the blocked coffee
grinder is just not used.
Message upon touching: "Coffee grinder blocked".
Coffee alarm
Meaning: The latest grinding cycle exceeded the timeout.
Possible causes: There is no coffee; the dosing unit sensor
is out of order or disconnected (after 5 attempts).
Consequence: The "no coffee" icon is shown over the beverages
for which the coffee phase is required with either the coffee
beans from the empty hopper or the not operational dosing unit.
Message upon touching: No message.
Water alarm
Meaning: No water pressure detected.
Consequence: All beverages are disabled.
Message upon touching: "No water".
Water level alarm
Consequence: All the beverages for which the steam phase, the
milk phase or the hot water phase is required, are disabled.
Message upon touching: "Water level error".
Brew group error
Consequence: All the beverages for which the coffee
phase is required are disabled.
Message upon touching: "Brew group error".