Saeco NEXTAGE CAP010 Mode D'emploi Et D'entretien page 92

English
Beverage selection
If the necessary conditions for beverage selection are met
the following screen will be displayed on the machine. If
not, some icons might be disabled.
The first 4 lines contain the selectable beverages.
The last line contains the icon for the selection of the
coffee bean hopper to use, the icon to adjust the height of
the dispensing spout and the icon of the beverage
multiplier.
Selecting the Coffee Bean Hopper
This control allows the user to select which coffee bean
hopper he/she would like to use to brew the coffee
bean-based beverage.
This selection is available
only if the machine is
equipped with 2 coffee
bean hoppers.
92
This selection is available
only if the recipe of the
selected beverage
not specify the coffee bean
hopper to use.
The following picture shows the two available options: The
one on the left indicates that the left coffee bean hopper is
being used, the one on the right indicates that the right
coffee bean hopper is being used.
Adjusting the Height of the Dispensing Spout
If the machine is programmed to allow the dispensing
spout height to be adjusted, the icon shown in the
following picture will be visible on the display.
This control allows the dispensing spout to be adjusted at
various heights so that glasses of different sizes can be used.
The picture below shows the minimum and maximum
heights possible.
does