First Appliance Start-Up - Saeco NEXTAGE CAP010 Mode D'emploi Et D'entretien

Press the "Coffee grinder" writing.
From this screen you can select which one of the two
coffee grinders you want to set.
After selecting the coffee grinder, press "Finer" to set a
finer grind (the value becomes lower), or "Coarser" to set
a coarser grind (the value becomes higher).
Press "Back" to return to the previous menu.
To exit the maintenance menu and return to the beverage
selection screen, press the bottom left arrow and wait for
a few seconds.
The effects of the grind
adjustment will become
noticeable after brewing
2-3 cups of coffee.
7.8

First Appliance Start-up

Check if the removable components are correctly placed
and if the door is closed. If this is not the case, an
indication of the component that is in the wrong position
will be displayed upon beverage selection.
Refill the machine (follow the instructions above) and
connect the appliance to the water network (see section
"Connection to the Water Network") and to the mains
(see section"Connection to the Electric Network").
Turn the all-pole switch to "I".
English
85