«Aqua Prima» Water Filter; Display - Saeco Talea Touch Mode D'emploi

«AQUA PRIMA» WATER FILTER
To improve the quality of the water you use, and extend the life of your machine at the same time, it is
initialization program (see programming). By using this program, the machine advises the user when the
1
Remove the Aqua Prima water
date of the current month.
4
Place a container beneath the hot
water spout.
7
on off
reload water
Fill the water tank if necessary.
All manuals and user guides at all-guides.com
2
Press down until it clicks into place.
5
1.2 machine settings
alerts and
language &
acoustic

display

cup-warming
surface
Access programming (see page
18 and 19). Press "water settings".
8
Have you replaced the old water
Press the
3
Fill the tank with fresh drinking
the full tank for 30 minutes for
correct initialization.
6
settings
water
settings
9
Turn the knob until the
position is reached. Water
dispensing begins.
7
1.2.4 water settings
rinse
on 39
water
hardness
3/4
).