INSTALLATION – VENTED TO THE OUTSIDE
INSTALL FILTERS
Remove protective film on filters.
Tip the filter into the lower channel at the rear
of the opening. Push back, lift and pull the knob
forward until the filter rests on the channel.
Lower Filter
Channels
FINALIZE INSTALLATION
on the front face of the hood and any other packaging
materials.
installed and the filter light is not on.
Installation Instructions
16
Turn power on. If the filter light on the control panel
glows, adjust the right-side filter in the channel to
engage the switch arm.
Lower
filter channel
the Owner's Manual for operating instructions
and the Problem Solver.