Installation; Warnings On The Installation And Assembly; Components Location - Iberspa SM-COM-PR Manuel D'utilisation

4. INSTALLATION

4.1. Warnings on the installation and assembly

• On connecting the electrical cables to the equipment, care should be taken regarding
the layout inside the connection box, check that pieces of cable do not remain inside and
that the earth conductor is properly connected.
• Particular care should be taken that water does not, under any circumstances, leak into
the pumps or into the live electrical parts.
ATTENTION
• This equipment cannot be connected to an ordinary plug.
• This equipment requires proper electrical installation.
• The connection must be earthed.
• Follow domestic electric regulations.
Do not position the equipment anywhere where water could leak into the
electrical equipment compartment.
It should be easily accessible for maintenance work.

4.2. Components location

Place the equipment in a room near the Spa. The maximum distance between the
equipment and the Spa is 7 Metres, and the minimum distance is 2 metres vertical. If it is
not possible to respect these measurements, please consult your supplier.
* The maximum distance is the length of the connection piping between the equipment
and the Spa.
8
*
7m
≤
041