General Details; Safety Warnings; General; Warnings In Installation And Assembly Work - Iberspa SPA DAY DREAM 32473 Manuel De Fonctionnement

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
UTILIZATION MANUAL

1. GENERAL DETAILS

This manual contains all the information needed to
fully enjoy your SPA. We recommend that you take
some time to go over the points detailed below.
If you have any question or doubt on the operation or
maintenance of this product, please contact your local
dealer. They are professional specialists and their
knowledge will help you enjoying this product.
IMPORTANT: The manufacturer reserves the right to
modify part of the design or specifications without
prior notice and without entering into any obligation.

2. SAFETY WARNINGS

2.1. GENERAL

Avoid contact with electrical voltage
Carefully follow current regulations regarding
accident prevention.
Any modification on the equipment requires prior
authorisation from the manufacturer. Original
spare parts and accessories authorised by the
manufacturer
guarantee
manufacturer of the equipment is exempt from all
liability for damages caused by using non-
authorised spare parts or accessories.
During operation, some parts of the equipment
are at dangerous electrical voltage levels. Work on
each element or equipment can only be performed
once it has been disconnected from the mains and
with the start-up devices disconnected.
The user should ensure that assembly and
maintenance works are carried out by qualified
and authorised persons, and that they have
carefully
read
the
instructions.
Safety in the operation of the machine can only be
guaranteed if installation and service instructions
are followed.
The limits indicated in the electrical control panel
cannot be exceeded under any circumstances.
Contact the Technical Service of the manufacturer
or the local dealer of the manufacturer in the
event of malfunction or a breakdown.
In this respect, the current regulations in each
country should be followed.
2.2.
WARNINGS
ASSEMBLY WORK
Take particular care to ensure that water cannot
enter the pumps and live electrical parts.
greater
safety.
installation
and
IN
INSTALLATION
2.3. WARNINGS IN MAINTENANCE WORKS
Before carrying out any electrical or mechanical
maintenance work, make sure that the machine is
disconnected from the mains, and that the start-
up devices are blocked.
Do not handle the equipment with wet feet.

2.4. AVOIDING RISKS OF HYPERTHERMIA

Prolonged, direct contact with hot water could
cause HYPERTHERMIA. This occurs when the
internal body temperature reaches levels above
the normal temperature of 36.5ºC.
Symptoms of hyperthermia are a sudden drop in
blood pressure resulting in a sensation of dizziness
with the possibility of fainting.
The Spa water should never be above 40ºC.
Water temperatures between 37ºC and 40ºC are
only considered safe for adults without any health
problems. Lower temperatures are recommended
for the majority of people and for children.
The
MEDICINES COULD INCREASE THE RISK OF
HYPERTHERMIA. IT IS NOT ADVISABLE FOR
PREGNANT WOMEN TO USE THE SPA.
service
AND
2
THE USE OF ALCOHOL, DRUGS OR
CONSULT YOUR DOCTOR
EN

Publicité

Table des Matières
loading

Table des Matières