Swimspa Control; Maintenance; Maintenance Warnings - Iberspa SM-COM-PR Manuel D'utilisation

6.5. Swimspa control

A
A - Jetstream control
With the jetstream control you can choose the power of the bottom jetstream and
the massage.
B – Fountains control
Turning the fountains control you can regulate the flow of the three fountain jets. The
fountain only runs when the filtration circuit is running or the spa is in heating process.
C – Main control panel
With the electronic main control panel you can turn on or turn off the Jets, Blower
(optional) and Light, set the Temperature, the filtration cycles and Time.
D – Air control
With the air input valve you can adjust the air turbulence of the jetstream.
E – Jetstream control
With the jetstream control you can choose the power of the top jetstream and the
massage.

7. MAINTENANCE

The Spas are built with maximum quality and with the hardest wearing materials available.
Proper care and maintenance will ensure a long life-span of the Spa and its components.

7.1. Maintenance warnings

• Before carrying out any electrical or mechanical maintenance work, make sure that the
machine is disconnected from the mains, and that the start-up devices are blocked.
• Do not handle the equipment with wet feet.
• Before carrying out any work on the Spa, it should be switched off from the electrical
supply (differential in the OFF position, or disconnect the mains cable).
B C D E
030
ENG
29