Systems - Iberspa SM-COM-PR Manuel D'utilisation

6.2. Systems

ATTENTION
• Do not try to repair parts. Call your vendor for technical support.
• Do not turn on the light when the spa is empty: The bulb will blow due to
overheating.
• The spa has been designed for intermittent use only: do not use it more
than two 15min sessions per day.
• Follow all of the instructions on electrical connections described in this
manual.
• Only authorised electricians should install the spa.
Your spa is equipped with an electronic control system that will enable you to regulate the
temperature of the water, choose the filter cycle that best suits your needs and activate
the massage pumps and the blower pump. It will also enable you to turn on your spa
lighting, change its colour and sequence. Depending on the design, your spa will have
one of the following systems:
· TP600
2 Speed pump
Heater
Spotlight
020
Circulation Pump
Massage Pumps
Turbo-Blower pump
Heater
Spotlight
021
Circulation Pump
2 Massage Pumps
Heater
Spotlight
022
ENG
19