Dismounting The Mechanical Unit - Reely SKY Agusta A109 Notice D'emploi

a) Dismounting the mechanical unit
For maintenance or repair work, it might become necessary to dismount the mechanical unit of the helicopter. Proceed
in the following order:
• Remove the rear end of the fuselage.
• Remove the screw of the blade control holder (1) which is
located above the grub screw (2) of the blade holder (fig.
9).
• Remove the attachment screw (3) of the tail rotor control
arm (fig. 10).
• Loosen the grub screw (fig. 9, pos. 2) of the blade holder
and pull the freewheel as well as the blade holder from
the shaft.
• Remove the five attachment screws (4) from the rear rotor
gear (fig. 11).
All manuals and user guides at all-guides.com
Figure 9
Figure 10
Figure 11
49