Right Side; Tools Required - R&G CP0339BL Instructions De Montage

13
2
1
12
9
11
10

Right Side

LEGEND
ITEM 1 = CRASH PROTECTOR CAPS (BC0002) (x2).
ITEM 2 = CRASH PROTECTOR (B0431 with CS340) (x2).
ITEM 3 = SPACER (S0634) (10mm LONG) (x1).
ITEM 4 = M8x16mm LONG HEX HEADED BOLT (x1).
ITEM 5 = M8 PLAIN WASHER (x1).
ITEM 6 = SPACER (S0633) (9.6mm LONG) (x1).
ITEM 7 = STAINLESS BACKING PLATE (PLATE 0056) (x1).
ITEM 8 = MOUNTING BLOCK (M0347) (x1).
ITEM 9 = M12x1.25x70mm LONG HEX HEADED BOLT (x2).
ITEM 10 = LOCK-WASHERS (LW0001) (x2).
ITEM 11 = M12 PLAIN WASHERS (x2).
ITEM 12 = 100mm LONG SELF-ADHESIVE FOAM (x3).
ITEM 13 = MOUNTING BLOCK (M0348) (x1).
Please note that in cases where kits are packed with rubber washers holding the components
onto the bolt – the rubber washers should be thrown away!

TOOLS REQUIRED


Socket set to include 10, 12, 13, 17 & 19mm socket and wrench.

13mm spanner.

Socket set to include 5mm A/F.

Torque wrench (up to 40Nm).

Phillips screwdriver.
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com