Right Side; Tools Required - R&G CP0419BL Instructions De Montage

CP0419
Page | 2

RIGHT SIDE

LEGEND
ITEM 1 = CRASH PROTECTOR CAPS (BC0002) (x2).
ITEM 2 = M10 x 1.25 x 130mm LONG HEX HEAD BOLT (x1).
ITEM 3 = M10 WASHERS (x4).
ITEM 4 = LOCK-WASHERS (LW0001) (x2).
ITEM 5 = CRASH PROTECTOR BOBBINS (B0431 with CS341) (x2).
ITEM 6 = SPACER (S1010 – 70mm LONG) (x1).
ITEM 7 = M6 x 40mm LONG BUTTON HEAD BOLT (x1)
ITEM 8 = M6 x 35mm LONG BUTTON HEAD BOLT (x3)
ITEM 9 = M6 WASHERS (x4)
ITEM 10 = LHS MOUNTING BRACKET (PLATE 0203) (x1)
ITEM 11 = M10 NYLOC NUTS (x2)
ITEM 12 = SPACER (S0011 – 24mm LONG (x1)
ITEM 13 = OEM ENGINE BOLT LHS – for illustration purpose only; not supplied in the kit
ITEM 14 = M10 x 100mm LONG HEX HEAD BOLT (x1)
ITEM 15 = M10 x 85mm LONG COUNTERSUNK BOLT (x1)
ITEM 16 = RHS MOUNTING BRACKET (PLATE 0204) (x1)
ITEM 17 = SPACER (S1009 – 37mm LONG) (x1)
ITEM 18 = SPACER (S1011 – 40mm LONG) (x1)
Please note that in cases where kits are packed with rubber washers holding the components
onto the bolt – the rubber washers should be thrown away!

TOOLS REQUIRED


4mm & 5mm Allen Key.

Socket set to include 14mm & 17mm socket and wrench.

Torque wrench (up to 40N/m).

17mm spanner
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com