Right Hand Side; Tools Required - R&G CP0280 Guide Rapide

THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW.
DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT.
M6x60mm LONG CAP HEAD M6x60mm LONG CAP HEAD
BOLTS (x2) BOLTS (x2)
CLAMP
(F0030) (x1)
M10x1.25x70mm LONG HEX
HEAD BOLT (x1)
You will also receive four lengths of self-adhesive foam (not shown).
Please note that in cases where kits are packed with rubber washers holding the components onto the
TOWARDS REAR
OF BIKE
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
MOUNTING
BLOCK
(M0273) (x1)

RIGHT HAND SIDE

bolt – the rubber washers should be thrown away!

TOOLS REQUIRED


Socket set to include 17mm socket and wrench.

Set of metric Allen keys.

Torque wrench (up to 40Nm).
PICTURE THREE
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
www.rg-racing.com
CRASH-PROTECTOR
(B0063/CS066) (x1)
R&G Racing
Email: info@rg-racing.com
2
PROTECTOR CAP
(BC0002) (x1)
M10x1.25x45mm
LONG HEX HEAD
BOLT (x1)
M10 PLAIN
WASHER (x1) M10 PLAIN
WASHER (x1)
M10 PLAIN
M12 SHAKE-PROOF WASHER (x1)
WASHER (LW0001) (x1)
TOWARDS FRONT
OF BIKE