Right Side; Tools Required - R&G CP0405BL Instructions De Montage

CP0405

RIGHT SIDE

LEGEND
ITEM 1 = MOUNTING BLOCK (M0479) (x1).
ITEM 2 = M6 x 35mm LONG BUTTON HEAD BOLTS (x4).
ITEM 3 = SPACER (S0957 – 45mm LONG) (x1).
ITEM 4 = CRASH PROTECTOR (B0431 with CS341 & S0255) (x2).
ITEM 5 = LOCK-WASHERS (LW0001) (x2).
ITEM 6 = M10 WASHERS (x4).
ITEM 7 = M10 x 1.25 x 105mm LONG HEX HEAD BOLT (x1).
ITEM 8 = CRASH PROTECTOR CAPS (BC0002) (x2).
ITEM 9 = M10 x 1.25 x 80mm LONG CAP HEAD BOLT (x1).
ITEM 10 = SPACER (S0959 – 30.50mm LONG) (x1).
ITEM 11 = M10 x 1.25 x 100mm LONG HEX HEAD BOLT (x1).
ITEM 12 = SPACER (S0958 – 34.50mm LONG) (x1).
ITEM 13 = MOUNTING BLOCK (M0480) (x1).
ITEM 14 = SPACER (S0960 – 44mm LONG) (x1).
ITEM 15 = M10 x 1.25 x 90mm LONG CAP HEAD BOLT (x1).
Please note that in cases where kits are packed with rubber washers holding the components onto the bolt
– the rubber washers should be thrown away!

TOOLS REQUIRED


Socket set to include 4, 5 & 8mm AF sockets and wrench.

Socket set to include 8, 10, 14 & 17mm sockets and wrench.

Torque wrench (up to 40N/m).
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com