Adjusting Oven Burner Flame; Broiler Flame - Amana ARG7300 Serie Mode D'emploi

Adjusting Oven Burner Flame

Properly adjusted oven burner flames are clean and blue
with a distinct inner cone approximately ½ inch long.
• If burner flame is blowing or noisy, reduce airflow to
burner.
• If burner flame is yellow and does not hold its
shape, increase airflow to burner.
WARNING
To avoid electric shock that can cause personal injury
or death, disconnect main electrical supply to range
before servicing.
1. Remove storage drawer.
• Removing Storage Drawer section.
2. Locate and remove 2 screws attaching Z-shaped
cover plate.
• Cover plate located in center, rear of storage drawer
cavity.
• Removing cover plate exposes oven burner orifice
and air shutter.
C
A—Air Shutter Lock Screw
B—Orifice Hood
C—Air Shutter
3. Loosen air shutter lock screw and open or close air
shutter.
• Tighten air shutter lock screw after adjusting.
4. Replace cover plate and storage drawer.

Broiler Flame

Broiler flame should appear hazy or fuzzy. Haze should
be approximately
fixed orifice it can not be adjusted. Broiler does not have
an air shutter.
A
B
14
3 / inch thick. Because broiler has a
8