Effect List (English)
Chorus
This is a stereo chorus. A filter is provided so that you can adjust the timbre of the chorus sound.
Parameter
OFF, LPF, HPF
Filter Type
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000,
Cutoff Freq
2500, 3150, 4000, 5000, 6300, 8000 [Hz]
0.0–100 [msec]
Pre Delay
OFF, ON
Tempo
Sync
Rate (Hz)
0.05–10.00 [Hz]
Note
Rate (note)
Ø
13.10.
Note(P.204)
Depth (*1)
0–127
Phase
0–180 [deg]
Low Gain
-15–+15 [dB]
High Gain
-15–+15 [dB]
D100:0W–D0:100W
Balance
Level
0–127
*1: This parameter corresponds to MFX Ctrl. For details, refer to
Ctrl)(P.205)".
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to
MASTER EFFECT (MASTER EFFECT
186
Value
CTRL)(P.206)".
Type of filter
OFF: No filter is used.
LPF: Cuts the frequency range above the Cutoff
Freq
HPF: Cuts the frequency range below the Cutoff
Freq
Basic frequency of the filter
Adjusts the delay time from the direct sound until
the chorus sound is heard.
If this is ON, the rate synchronizes with the tempo
of the rhythm.
Ø
Jouer avec le métronome#KIT
Frequency of modulation
Depth of modulation
Spatial spread of the sound
Gain of the low range
Gain of the high range
Volume balance between the direct sound (D) and
the chorus sound (W)
Output Level
"Contrôle du MFX avec les molettes PAD EDIT [1] [2] (MFX
"Contrôle du MASTER EFFECT grâce à la molette
Explanation
TEMPO(P.33)