Auto Pan; Slicer - Roland SPD-SX PRO Manuel De Référence

Auto Pan

Cyclically modulates the stereo location of the sound.
Parameter
TRI, SQR, SIN, SAW1, SAW2, TRP
Mod Wave
Tempo Sync OFF, ON
Rate (Hz) 0.05–10.00 [Hz]
Rate (note) Note
Ø
13.10. Note(P.204)
Depth (*1) 0–127
Low Gain -15–+15 [dB]
High Gain -15–+15 [dB]
Level 0–127
*1: This parameter corresponds to MFX Ctrl. For details, refer to
Ctrl)(P.205)".
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to
MASTER EFFECT (MASTER EFFECT

Slicer

By applying successive cuts to the sound, this effect turns a conventional sound into a sound that appears to be played as a
backing phrase. This is especially effective when applied to sustain-type sounds.
Parameter Value
Step 01–16 0–127
OFF, ON
Rate (sync sw)
Rate (Hz) (*1) 0.05–10.00 [Hz] Rate at which the 16-step sequence will cycle
Rate (note) (*1) Note
Value
How the pan changes
TRI: Triangle wave
SQR: Square wave
SIN: Sine wave
SAW1/2: Sawtooth wave
TRP: Trapezoidal wave
If this is ON, the rate synchronizes with the tempo of the rhythm.
Ø
Jouer avec le métronome#KIT
Frequency of the change
Depth to which the effect is applied
Gain of the low range
Gain of the high range
Output Level
CTRL)(P.206)".
Level at each step
If this is ON, the rate synchronizes with the tempo of the rhythm.
Ø
Jouer avec le métronome#KIT
Explanation
TEMPO(P.33)
"Contrôle du MFX avec les molettes PAD EDIT [1] [2] (MFX
"Contrôle du MASTER EFFECT grâce à la molette
Explanation
TEMPO(P.33)
Effect List (English)
181