Installing The Tv Or Lcd Monitor On The Wall; Kd-85X90Xxh / 75X90Xxh Km-85X90Xxh / 75X90Xxh Fw-85Bz40H / 75Bz40H - Sony SU-WL450 Informations D'installation

Installing the TV or LCD
Monitor on the wall
KD-85X90xxH / 75X90xxH
KM-85X90xxH / 75X90xxH
FW-85BZ40H / 75BZ40H
WARNING
 Be sure that two or more persons (three or more
persons for 75 inches and above TV or LCD Monitor
set) hold the TV or LCD Monitor when carrying it.
1
Lift the TV or LCD Monitor.
 For the location of the Pulleys  to the
hang on the Base or Base Adaptor, refer
to the table of step 3 in "Installing the
Wall-Mount Bracket to the wall" on page
9.
 Make sure that the rear of the TV or LCD
Monitor touches the Base or Base
Adaptor when holding the TV or LCD
Monitor.
Note
 Hold the TV or LCD Monitor securely with both hands
and make sure the Belt  and the bottom of the TV
or LCD Monitor align with the masking tape.
 Carry the TV or LCD Monitor with three people and
the person who is in front of the TV or LCD Monitor
leads the others to adjust the position.
 Take great care when installing the TV or LCD Monitor
to the wall especially for the person who is
supporting the TV or LCD Monitor from below, the
television set may fall, causing serious bodily injury or
even death.
2
Install the TV or LCD Monitor
onto the Base or Base Adaptor.
 Gently slide down the TV or LCD Monitor
and hang the Pulleys  attached to the
rear of the TV or LCD Monitor to the Base
or Base Adaptor, making sure to confirm
the shape of the holes.
 After installing the TV or LCD Monitor on
the wall, confirm the Pulleys  are firmly
latched into the Base or Base Adaptor.
 Release both hands slowly to ensure
that the TV or LCD Monitor does not fall.
 After installing the TV or LCD Monitor on
the wall, remove the masking tape, etc.
from the wall.
− 15 (GB) −


GB