Kd-65X90Xxh / 55X90Xxh Km-65X90Xxh / 55X90Xxh Fw-65Bz40H / 55Bz40H - Sony SU-WL450 Informations D'installation

KD-65X90xxH / 55X90xxH
KM-65X90xxH / 55X90xxH
FW-65BZ40H / 55BZ40H
1
Remove the screws from the
rear of the TV or LCD Monitor.
Note
 Be sure to store the removed screws and unused
parts in a safe place, keeping them away from
children.
2
Attach Wall-Mount Attachment
(supplied with the TV or LCD
Monitor) to the rear of the TV or
LCD Monitor (to make it parallel
with the wall).
VS
Note
 Be sure to fasten the Wall-Mount Attachment when
attaching them to the TV or LCD Monitor.
Use only a flat head screwdriver to install the
Wall-Mount Attachment. Use of another tool might
result in over torqueing the Wall-Mount Attachment
and damaging the TV or LCD Monitor.
1.5 N·m
{15 kgf·cm}
− 13 (GB) −
3
Attach the Attachment parts for
Wall-Mount Bracket. Check the
Attachment parts by referring to
"Supplied with SU-WL450" in
"Checking the parts" on page
6.
Note
 Firmly secure the Attachment parts using screws.
 When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
Standard mounting (2-a)
Belt 
Slim mounting (2-b)
4
Connect the necessary cable(s)
to the TV or LCD Monitor.
Make sure to connect the cables before
installing the TV or LCD Monitor on the
wall. You will be unable to connect the
cables when the TV or LCD Monitor is
installed.
Note
 Subcontract the cable routing in the wall to a licensed
contractor.
 Bundle the connecting cables to prevent stepping on
them before wall mounting.
Pulley 
Screw
(+PSW 6 x 20) 
Screw
(+PSW 6 x 50) 
Spacer (60 mm) 
Pulley 
Screw
(+PSW 6 x 20) 
Spacer (20 mm) 
Belt 
GB