Preparing For The Installation Of The Tv Or Lcd Monitor; Kd-85X90Xxh / 75X90Xxh Km-85X90Xxh / 75X90Xxh Fw-85Bz40H / 75Bz40H - Sony SU-WL450 Informations D'installation

Preparing for the installation
of the TV or LCD Monitor
Make sure to attach the Table-Top Stand
before installing the TV or LCD Monitor to the
wall by referring to the Setup Guide.
KD-85X90xxH / 75X90xxH
KM-85X90xxH / 75X90xxH
FW-85BZ40H / 75BZ40H
1
Mark the installation location on
the wall.
 Use masking tape, etc. (not supplied) to
mark the location of the TV or LCD
Monitor near the Base or Base Adaptor.
Refer to the following table.
Screen centre point
(1,000)
(300)
Masking tape
− 11 (GB) −
(mm)
Model Name
KD-85X90xxH
KM-85X90xxH 1,899
FW-85BZ40H
KD-75X90xxH
KM-75X90xxH 1,674
FW-75BZ40H
2
Remove the screws from the
rear of the TV or LCD Monitor.
Note
 Be sure to store the removed screws and unused
parts in a safe place, keeping them away from
children.
3
Attach Wall-Mount Attachment
(supplied with the TV or LCD
Monitor) to the rear of the TV or
LCD Monitor (to make it parallel
with the wall).
VS
Note
 Be sure to fasten the Wall-Mount Attachment when
attaching them to the TV or LCD Monitor.
Use only a flat head screwdriver to install the
Wall-Mount Attachment. Use of another tool might
result in over torqueing the Wall-Mount Attachment
and damaging the TV or LCD Monitor.
471 200 43
372 150 8
1.5 N·m
{15 kgf·cm}
GB