Attaching The Wall-Mount Bracket To The Solid Concrete Or Concrete Block - Sony SU-WL850 Informations D'installation

 Attaching the Wall-Mount
Bracket to the Solid Concrete or
Concrete Block
WM1
Installing the Wall-Mount
Bracket to the Wall
1
Decide on the installation
location.
Make sure that the wall has enough space
for the TV or LCD Monitor and is capable of
supporting a weight of at least six times
that of the TV or LCD Monitor.
• Refer "Measurement for Wall-Mount
Bracket installation on the wall" on page
20.
• Refer to your TV's or LCD Monitor's
Reference Guide for the TV's or LCD
Monitor's weight.
Note
 When your TV or LCD Monitor is installed on the
wall, the upper side of the TV or LCD Monitor
slightly leans forward.
 We recommend you to check the position of TV or
LCD Monitor in the viewing environment.
2
Align
WM1
four marks.
× 4
Note
 Use a level to check whether
3
Drill pilot holes on the marks.
Make sure the location on the wall to drill
the holes are strong enough to support a
weight of at least six times that of the TV or
LCD Monitor.
Note
 Pilot holes must be drilled to a depth of 75 mm,
using a 10 mm diameter drill bit.
4
− 13 (GB) −
to the wall and make
WM1
WM1
is level.
× 4
10 mm
75 mm
GB