Preparing For The Installation Of The Tv; Pulley; Psw 6X20 - Sony SU-WL450 Informations D'installation

Preparing for the installation
of the TV
Note
 Be sure to store the removed screws and unused parts in
a safe place, keeping them away from children.
Installing the TV to the Wall
from Carton
1
Remove the centre cushion.
2
Remove the screws from the
rear of the TV.
Note
 Be sure to store the removed screws and unused
parts in a safe place, keeping them away from
children.
3
Attach the Attachment parts for
Wall-Mount Bracket. Check the
Attachment parts by referring to
"Supplied with SU-WL450" in
"Checking the parts" on page
6.
Note
 Firmly secure the Attachment parts using screws.
 When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
Standard mounting (2-a)
Belt 
Slim mounting (2-b)
Belt 
− 11 (GB) −
Pulley 
Screw
(+PSW 6 x 20) 
Screw
(+PSW 6 x 50) 
Spacer (60 mm) 
Pulley 
Spacer (20 mm) 
Screw
(+PSW 6 x 20) 
GB