Honeywell 301 Serie Mode D'emploi page 61

Selecting the first line of the first screen allows selection from three display modes:
Manual scroll, 3‐second scroll, 5‐second scroll. If Manual scroll mode is chosen, the
screen will only advance if you press on the arrow keypad buttons. If either 3 or 5
second scroll mode is chosen, the screens will automatically scroll display readings
for all devices connected to the controller after 3 or 5 seconds.
6. Config
Manual scroll mode
Set Date and Time
Menu français
3 or 5 second scroll modes do not prevent the keypad arrows to be used to return
to a previous screen or move ahead through the screens manually.
Selecting the second line allows the date and time in a new screen to be adjusted;
Date and Time. When a number is flashing, the value can be changed using the
up/down keypad arrows. The year, month, day and the hour, minute and second
values can be changed.
The controller does not manage Daylight Savings Time; therefore, users must man-
ually adjust any time changes.
Date and Time
2005-11-21
(ISO 8601 standard)
Selecting the third line allows the display language to be changed. If the display is
already in English, it will then display the Menu François option (and vice‐versa).
Simply scroll to the line and press Enter to change the language.
Second main screen in the Config menu allows a new user pass‐word to be set.
6. Config
Set User Password
- 2967 –
Slave Port Cnfg
The default password is 2967. Select Set User Password to change the password:
•
When the first digit blinks, change the value by using the up/down keypad ar-
rows to increase or decrease the number
•
Use the left/right keypad arrows to move from one digit to the next.
•
When the desired e has been set, press Enter to validate it and exit the editing
mode.
Note: Contact Honeywell technical support for help with lost passwords at 1-800-
563-2967.
The slave port is not used
Scroll through the main Config menu screens using the left (previous) or right
(next) keypad arrows.
52
11:47:36