Parameters - Honeywell 301 Serie Mode D'emploi

Parameters

The "parameters" function allows one transmitter's configuration to be copied to an-
other or one event's parameters to be copied to another event. This allows several
devices that share identical or similar parameters to be quickly configured.
5. Copy
-parameters-
TxInfo to TxInfo
Event to Event
The options within this screen are:
Tx Info to Tx Info copies transmitter parameters from one device to another.
Event to Event copies parameters from Event to Event.
The process is identical for both options:
•
Select source, (the data to be copied) using the up/down keypad arrows and
press Enter.
•
When the transmitter address is flashing, use the up/down keypad buttons to
search for the desired device address.
•
Press Enter to select the new address
•
Select the target address (where the data is to be copied to) in the same way
as source
•
Select COPY and press Enter. The parameters have been copied.
TxInfo to TxInfo
Source tx001
Target tx113
COPY
Event to Event
Sourse #001
Target #013
COPY
49