Output Wiring; Relays - Honeywell 301 Serie Mode D'emploi

Output Wiring

Relays

Relays are provided in: 301-C, AA96D, 301-R8, AA96d-R8, 301-AP, 301-EM and
301-EMRP. The relay outputs are rated to 5A at 30Vdc or 250Vac resistive load.
Relays can be used to activate horns, strobes or other devices.
See Appendix B for details about ASHRAE 15 and CSA B52 standards.
Although each relay is programmed with a default setting (normally open/de-ener-
gized), they can be configured using the controller programming menu to be "fail-
safe" (normally closed/energized).
Product
301-C and
AA96D
301-R8
and
AA96D-
R8
301-AP
301-EM
301-
EMRP
14
Relay Controlled by
Count
4 Internally programmed Events, Relay 1 and 2
can be controller by external BACNet system
8 301-C and AA96D programmed Events
3 301-C and AA96D programmed Events
4 Factory programmed based on region
4 Controlled by 301-EM Events