Change Tx Address - Honeywell 301 Serie Mode D'emploi

Change Tx Address

Selecting Change Tx Address allows users to move a device from one TX address
to another:
•
Use the arrows to scroll to Change Tx Address and press Enter to select
•
In the next screen, scroll to the address number and press Enter to select
•
Use the up or down arrows to increase or decrease the address value and
press Enter to validate the new address.
The Change Tx address option is only available (active) for device address 1 to 96
and if there is a Modbus device connected.
If the address is valid, the screen will display "Processing". If the address is invalid,
the screen will display "Invalid Tx" and return to the Change Tx Address screen (the
address for GasPoint devices cannot be changed). A final screen will display either
"Error" or "Success" (restart procedure if Error is displayed).
1. Tx
info
Erase current Tx
Change Tx Adress
Note: If a device address is changed to one already associated with another de-
vice, the existing data will be overwritten. Customers should know their net-
work's address assignments and be careful when changing a Tx address.
Delete the original Tx address to avoid duplicate entries. This feature is not
supported with XNX and XCD transmitters.
34
001
To address:
Processing...
1. Tx info 001
001
1. Tx info 001