PV-GS400Eng.book 33 ページ 2004年6月4日 金曜日 午後3時17分
2
Press the Recording Start/Stop Button
or [PHOTO SHOT] Button
recording.
PHOTO
SHOT
(52)
(47)
To Cancel Image Stabilizer Function
Set [TAPE RECORDING MENU] or
[CARD RECORDING MENU] >> [CAMERA] >>
[EIS] >> [OFF].
≥For other notes concerning this item, see
Fade In/Out Functions
Fade In
Fade In brings out images and sounds gradually
from a black screen at the beginning of a scene.
1
Keep pressing the [FADE] Button
during the Recording Pause Mode.
STILL
ENTER
(20)
FADE
≥The image fades out gradually.
2
When the image is completely gone, press
the Recording Start/Stop Button
recording.
(47)
3
Release the [FADE] Button
3 seconds after starting recording.
≥The image reappears gradually.
Recording Mode
(47)
Fade Out
(52)
to start
Fade Out causes images and sounds to
disappear gradually, leaving a black screen at the
end of a scene.
1
Keep pressing the [FADE] Button
recording.
.
-76-
≥The image fades out gradually.
2
When the image is completely gone, press
the Recording Start/Stop Button
recording.
(20)
3
Release the [FADE] Button
≥The still picture cannot fade in or fade out.
Backlight Compensation Function
This prevents the subject from being recorded too
darkly when backlit. (Backlight is the light that
shines from behind the subject being recorded.)
1
Press the [BACK LIGHT] Button
(47)
to start
≥The [ª] Indication flashes and then is
(20)
about
displayed.
≥The entire screen becomes brighter.
To Resume Normal Recording
Press the [BACK LIGHT] Button.
≥For other notes concerning this item, see
STILL
ENTER
(20)
FADE
(47)
(20)
REC
(10)
BACK
LIGHT
(20)
while
(47)
to stop
.
(10)
.
ª
ª
.
-76-
33