PV-GS400Eng.book 69 ページ 2004年6月4日 金曜日 午後3時17分
Notes
≥Macintosh is a registered trademark of Apple
Computer, Inc. ArcSoft, the ArcSoft logo,
ArcSoft PhotoImpression 4.0, ArcSoft
PhotoBase 4.0, ArcSoft PhotoBase 2.0, ArcSoft
Panorama Maker 3.0 and PhotoPrinter 4.0 are
trademarks of ArcSoft, Inc.
®
®
≥Microsoft
, Windows
, Windows Messenger
®
and DirectX
are either registered trademarks
or trademarks of the Microsoft Corporation in
the United States and/or other countries.
®
®
≥Intel
, Pentium
and Celeron
registered trademarks or trademarks of the Intel
Corporation.
≥All other names, company names, product
names, etc. in these instructions are the
trademarks or registered trademarks of their
respective corporations.
≥The names of the products you are using may
differ from the names given in the text.
Depending on the operating environment and
other factors, the contents of the screens used
in these instructions may not necessarily match
what you will see on your screen.
≥Although the screens in these Operating
Instructions are shown in English for the sake of
example, other languages are supported as
well.
≥These instructions do not cover the basic
operations of the personal computer or define
any terms. For this information, refer to the
Operating Instructions which accompany your
personal computer.
≥Do not disconnect USB Connection Cable while
the operation light of Camcorder is on. It may
freeze the software or destroy the data in
transfer.
≥We recommend using the AC adaptor as the
power source for the Camcorder when using
USB Connection Kit. Data may be lost If the
battery power is lost while transferring data.
≥If the Camcorder is used as a Web Camera
while virus checking software is running, the
Camcorder's operation may stop midway
through. In this case, exit the Windows
Messenger, reconnect the Camcorder and
restart the Windows Messenger.
≥Do not delete the folders in Memory Card such
as picture folder. Memory card may not be
recognized if folders are deleted.
With a PC
≥When the Camcorder is switched to the PC
Mode while it is connected to the personal
computer, "PC ACCESSING" is displayed on
the Camcorder and the operation mode of the
Camcorder cannot be switched. In this case,
disconnect the USB Connection Cable. Switch
the operation mode of the Camcorder and
reconnect the Cable.
®
≥If the Camcorder is connected in the PC Mode,
the [Removable Disk] icon representing the
Memory Card drive is displayed in
[My Computer].
®
are the
≥When the Tape Recording Mode of the
Camcorder is switched to the PC Mode, a
warning message may be displayed. You may
simply ignore it.
≥When you are using Windows XP or Windows
2000, you may install or uninstall this software
after logging ON by setting the user name to
Administrator or to a user name having
equivalent authority.
≥If you use Windows 98SE, the message, "File is
not found" may be displayed when the
Camcorder is connected for the first time. Enter
the following paths to complete the connection:
If the message "MTDV98M3.pdr is not found" is
displayed, enter
"C:\WINDOWS\system\IOSUBSYS". If the
message "MTDV98M3.sys is not found" is
displayed, enter
"C:\WINDOWS\system32\DRIVERS".
(The paths will differ depending on the
environment of your personal computer.)
≥If you install the USB Driver while the USB
Connecting Cable is being connected, or if you
do not follow these Operating Instructions, the
Camcorder will not be recognized correctly. In
this case, delete the USB Driver from
[Device Manager] as described below, uninstall
the USB Driver, and re-install it.
1 Set the Camcorder to Tape Recording Mode
or Tape Playback Mode, connect it to the
personal computer, and delete
[USB Video Device] (or [Panasonic DVC DV
Stream Device]) from [Device Manager].
2 Set the Camcorder to PC Mode and delete
[Panasonic DVC USB Storage] (Windows
98SE).
69