PV-GS400Eng.book 72 ページ 2004年6月4日 金曜日 午後3時17分
:
Soft Skin Mode
SOFT SKIN
PICTURE:
Picture
-47-
TITLE:
Title picture
WEB
:
WEB CAMERA Mode (recording)
-60-
WEB
:
WEB CAMERA Mode (playback)
-60-
PRINT (Highlighted):
PictBridge Mode
VOLUME:
Volume adjustment
3:30:45PM:
Date/Time Indication
N (F, E):
Photoshot Picture Quality (during
Photoshot recording)
[F] means Fine, [N] means
Normal and [E] means Economy.
-30-
0:
Remaining Number of Photoshot
pictures
:
RapidFire Consecutive Photoshot
Recording
:
Lock Setting
¥ (White):
DPOF Setting completed (set to
1 or more picture)
:
[2288k1728] Image size
2288
:
[1600k1200] Image size
1600
:
[1280k960] Image size
1280
:
[640k480] Image size
640
≥For images not recorded with this Camcorder,
the size display is determined as follows
according to the number of horizontal pixels.
:
640 or more, less than 800 (The
640
size is not displayed at under
640 pixels.)
:
800 or more, less than 1024
SVGA
:
1024 or more, less than 1280
XGA
:
1280 or more, less than 1600
SXGA
:
1600 or more, less than 2048
UXGA
:
2048 or more
QXGA
(Cyan):
Photoshot Mode
PICTURE
(Red):
While Photoshot recording is
PICTURE
activated
(Green): While the card is being read
PICTURE
(Red):
An unauthorized card is inserted.
PICTURE
ß:
Flash turned on
ß
i:
Flash (setting to [i])
ßj:
Flash (setting to [j])
ß
:
Flash (setting to [AUTO])
A
ß
i:
Flash (setting to [i] and [AUTO])
A
,
-40-
-41-
ß
j:
Flash (setting to [j] and [AUTO])
A
,
-40-
-41-
:
Video Flash turned off (when
lighted yellow, the Flash Sensor
determined that the light is
needed)
-40-
£:
Red Eye Reduction
72
Others
ª To Change the Counter Display Mode
-34-
By changing [C.DISPLAY] on the [DISPLAY]
-49-
Sub-Menu, you can change the Counter Display
Mode to Tape Counter Indicator [COUNTER]
(0:00.00), Memory Counter Indicator [MEMORY]
(M0:00.00), or Time Code Indicator [TIMECODE]
(0h00m00s00f). (
[DISPLAY] Button on the Remote Controller, you
can change the Counter Display Mode.
-56-
≥You cannot reset the counter when the
-44-
ª To Display Date/Time Indicator
To display Date/Time Indicator, set the
appropriate Date/Time in [DATE/TIME] on the
[DISPLAY] Sub-Menu. (
You can also press the [DATE/TIME] Button of
the Remote Controller repeatedly to display or
change the Date/Time Indicator.
ª To Change the Display Mode
-30-
By changing [DISPLAY] on the [DISPLAY]
-50-
Sub-Menu, you can change the Display Mode to
All Function Display [ALL] and Minimum Display
-50-
[OFF]. (
ª Progressive Photoshot
You cannot use the Progressive Photoshot
Function in the following cases.
When using Tape Recording Mode
≥Digital Effect Modes in [EFFECT1]
≥Digital Zoom range
≥1/750 s or faster shutter speed
≥When the Iris is [6dB] or more
≥Frame Mode
≥Wide/Pro-Cinema Mode
≥When the [
≥When the MagicPix Function is ON
≥When Portrait Mode is used
Initializing the Modes
You can change the Menu settings back to the
shipping condition.
1
-40-
-41-
-41-
-40-
≥Initializing will not erase the clock setting (
,
-78-
-41-
) By repeatedly pressing the
-23-
[C.DISPLAY] is set to [TIME CODE].
)
-23-
)
-23-
] Indication is displayed and the
brightness of the subject is insufficient
Set [TAPE RECORDING MENU] or
[CARD RECORDING MENU] >> [INITIAL] >>
[INITIAL SET] >> [YES].
≥Initializing takes a little while.
≥After initializing is completed, the
[COMPLETED] Indicator appears.
that has been adjusted.
)
-26-