PV-GS400Eng.book 50 ページ 2004年6月4日 金曜日 午後3時17分
4
Press the [;/∫/6/5] Button to select a
desired title.
STILL
ENTER
FADE
≥The selected title is marked with a frame.
5
Press the [ENTER] Button
[MULTI] Button
(12)
.
≥The selected title is displayed.
≥Recording and Photoshot Recording can be
made with pictures that have titles.
≥A title can be displayed also by pushing [TITLE]
(78)
Button
on the Remote Controller.
To Clear the Title Display
Set [DIGITAL] >> [TITLE IN] >> [OFF].
Or press [TITLE] Button on the Remote
Controller.
≥For other notes concerning this item, see
Writing Printing Data on a Card
(DPOF Setting)
DPOF Setting Printing data (DPOF Settings),
such as the number of images to be printed, can
be written to the Card. "DPOF" means Digital
Print Order Format.
1
Set the Mode Dial
(44)
Mode.
(44)
2
Set [PICTURE PLAYBACK MENU] >>
[EDITING] >> [DPOF SET] >> [YES] >>
[VARIABLE].
STILL
ENTER
(16)
FADE
MENU
DPOF SETTING
2
!:ENTER
≥When all images are not printed, select
[ALL 0].
50
Playback Mode
3
4
(19)
or press the
5
To Verify DPOF Setting
Select [VERIFY] in Step 2. The pictures for which
1 or more print is set in DPOF are played back
continuously.
≥For other notes concerning this item, see
Protecting the Files on a Card
.
-80-
(Lock Setting)
Precious files recorded on a Card can be locked
to prevent accidental erasure. (Even if files are
locked, the files will be deleted if the Card is
formatted.)
1
to Picture Playback
2
≥The SD Memory Card has a write protection
1
≥For other notes concerning this item, see
MENU:EXIT
Select a desired picture and press the
[ENTER] Button
(19)
.
≥The selected picture is marked with a frame.
≥The number of prints set by DPOF 1 is
displayed.
Press the [5] Button
(18)
(21)
to select the number of pictures to be
printed, and press the [ENTER] Button
≥[¥] Indication 2 is displayed in the picture
set. (
)
-72-
≥This is not the setting of the number of prints
for printing on PictBridge. (
Repeat Steps 3 and 4 and press the [MENU]
Button
(16)
when the setup is completed.
Set [PICTURE PLAYBACK MENU] >>
[EDITING] >> [FILE LOCK] >> [YES].
STILL
ENTER
(16)
FADE
MENU
FILE LOCK
640
640
640
640
640
640
!:ENTER
MENU:EXIT
Select the file to be locked, and press the
[ENTER] Button
(19)
.
≥The selected file is locked and the [
Indication 1 appears. Repeat this procedure
to lock 2 or more files.
≥Press the [ENTER] Button
cancel.
switch. (
)
-80-
or [6] Button
(19)
.
)
-56-
.
-80-
1
]
(19)
again to
.
-80-