Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
UK
Electrical safety:
Warning! Do not use the tool
if the mains or extension ca-
ble is damaged – danger of
electrical shock.
•
Before each use, check the
mains cable and the extension
cable for damage and aging.
Do not use the equipment if the
cable is damaged or worn.
•
If the connecting cable to this
equipment is damaged, it must
be replaced by the manufac-
turer, the customer service of
the same, or a similarly quali-
fied person in order to avoid
hazards.
•
Make sure that the mains volt-
age matches the data on the
tool's rating label.
•
If possible, connect the tool to
a socket with a residual-current
circuit breaker (RCD) trip switch
at a triggering current of not
more than 30 mA.
•
Avoid skin contact with
earthed objects such as metal
fences and posts.
•
Make sure that the connec-
tor on the extension cable is
protected from splash water,
and is made of rubber or has
a rubber covering. Only use
extension cables that are in-
tended for outdoor use and are
labelled as such. Use exten-
sion cables with a cable core
diameter of at least 2,5 square
millimetre. Always completely
unwind the cable reel before
use. Check the cable for dam-
age.
72
All manuals and user guides at all-guides.com
•
Use the cable hanger fitted for
the purpose when using an ex-
tension cable.
•
Do not carry the tool by the ca-
ble. Do not unplug the cable by
tugging on it. Keep the cable
away from heat, oil and sharp
edges.
Functional description
Your hand-operated garden tiller is
equipped with a maintenance free electric
motor and a gearbox with sump lubrication.
The tool is fitted with six rotating tine
wheels that automatically dig themselves
into the ground.
The steel frame can be folded to aid stor-
age.
Please refer to the following descriptions
for the function of the controls.
Functional parts
The major functional parts are
shown on page 2 and 3.
1 Control element
2 Release button
3 Starting lever
4 Right grip
5 Left grip
6 Upper grip handle
7 2 tightening levers for fastening
the upper grip handle
8 Mains cable
9 Middle handle bar
10 2 tightening levers for fastening
the middle handle
11 Bottom handle
12 Wheel adjustment ring
13 Protective cover
14 2 wheels
15 Cutting blade
Publicité
Table des Matières
