Conrad FS20 DI20-3 Notice D'emploi page 37

• Direct control using the button on the wireless dimmer:
Switching on/off:
Dimming:

Now you can control the basic functions of the wireless dimmer.
If you want to extent the FS20 wireless switching system or use additional
special features, please also read the following chapters.
Shortly press the button on the wireless dimmer (toggles on/off
loads connected).
Press the button on the wireless dimmer for more than 0.4
seconds. As long as the button is held down, the brightness of
the light changes.
Do not press the button for more than 15 seconds, which
will activate programming mode!
Release the button when the brightness is as desired.
Every pressing the button will reverse the dimming direction.
If the load is switched on, the pilot LED on the wireless dimmer
will light up.
If the load has been dimmed to a certain level of brightness, that
level will be saved and restored the next time the load is switched
on.
37