Intended Use; Scope Of Delivery; Technical Specifications And Features - Conrad FS20 DI20-3 Notice D'emploi

2. Intended use

The wireless dimmer FS20DI20-3 is intended for use with an FS20 wireless switching system
exclusively.
Transmitters of this wireless switching system can remotely turn on/off or dim loads connected
to the wireless dimmer (observe technical specifications and features of respective devices).
The wireless dimmer also has a programmable timer function.
Any use other than that described above could lead to damage to this product and involves the
risk of short circuits, fire, electric shock, etc.
No part of the product may be modified or converted. The housing must be closed completely
when operating the device.
All safety and assembly instructions must be observed without fail!

3. Scope of delivery

• Wireless dimmer
• Operating instructions

4. Technical specifications and features

• NOT suitable for use with transformers!
• Connected load:
• Supply voltage:
• Power input:
• Programmable timeframe:
• Reception frequency:
• Range:
• Dimensions:
• No memory loss without power supply (e.g. during blackout)
25-200 VA for resistive and inductive loads
230 V~/50 Hz
approx. 0.5 W
1 second up to 270 minutes (=4h 30min)
868.35 MHz
up to 100 m (in a free field)
approx. 50 mm * 34 mm * 148 mm (W * H * D)
27