Conrad FS20 DI20-3 Notice D'emploi page 31

• Always only load the device up to the capacity indicated. A capacity overload may lead to
the destruction of the device, a fire or an electrical accident.
• Only use approved power lines.
• You may only operate the product in dry indoor areas.
• The wireless dimmer must be mounted securely in a fixed installation (e.g. wall mounting
using screws and plugs).
If you are working with flexible installation cables, you must use suitable wire end sleeves
for the multi-wire conductors contained.
• The accident prevention regulations of the relevant trade associations for electrical systems
and operating materials are to be observed in commercial institutions.
• Consult an expert when in doubt about the mode of operation, safety or connection of the
device.
• Handle the product with care. It can be damaged through impact, blows or by being dropped
even from a low height.
31