Cleaning And Maintenance; General; Maintenance - Reely Generation X Notice D'emploi

12.

Cleaning and Maintenance

a) General Information
If you have driven the vehicle before, let all parts (e.g. motor, exhaust, etc.) cool down completely first.
Clean the whole vehicle of dust and dirt after driving, e.g. with a long-haired clean brush and a vacuum cleaner.
Compressed air aerosols can also be helpful.
Do not use cleaning aerosols or conventional household cleaners. This may damage the product and lead
to discolouration of the plastic parts or the body.
Never wash the vehicle with water, e.g. using a high-pressure cleaner. This will destroy the engine and the
receiver as well as the servos. The vehicle must not become damp or wet!
A soft cloth, slightly dampened, can be used to wipe the car body. Do not rub too firmly in order to avoid scratch marks.
b) Maintenance
All moveable parts and parts with bearings must be lubricated with a low viscosity machine oil or spray grease after
cleaning of the model or several drives. Excess oil grease must be removed.
At appropriate intervals, you should perform maintenance work and function checks on the vehicle. This ensures
trouble-free operation and road-worthiness for a long time.
Motor vibrations and shocks during driving can loosen parts and screw fittings. Certain parts of the vehicle may also
be subject to regular wear (e.g. tyres, couplings, brake pads, air filters, glow plugs) or require regular maintenance
(e.g. clean/replace and oil air filter).
Therefore, check the following items before and after driving:
• The tight fit of wheel nuts and of all vehicle screw fittings
• Condition of the air filter (clean/replace if required and oil with air filter oil)
• Correct servo attachment
• Glue-connections of tyres and rims or tyre condition
• Attachment of all cables (they must not get into movable parts of the vehicle)
• Tight fit and condition of the fuel hoses, tightness of the fuel system
• Function of the glow plug
• Condition of the brake pads
• Function of the servo linkage for the carburettor and brake linkage
• Function of the steering
71