Publicité
Les langues disponibles
Les langues disponibles
LEGEND
ITEM 1 = M12x1.25x90mm LONG HEX HEAD BOLT (x1).
ITEM 2 = M12 WASHERS (x2).
ITEM 3 = LOCK-WASHERS (LW0001) (x2).
ITEM 4 = M6x65mm LONG BUTTON HEAD BOLT (x3).
ITEM 5 = M6x55mm LONG BUTTON HEAD BOLTS (x2).
ITEM 6 = M6x20mm LONG BUTTON HEAD BOLTS (x2).
ITEM 7 = PLASTIC SPACER (S0792) (16.5mm long)
(x1).
ITEM 8 = SPACER (S0758) (3mm long – 9.2mm ID) (x1). *** FOR 1199 '12-'13 ONLY ***
ITEM 9 = SPACER (S0737) (23.5mm long - stepped) (x1).
ITEM 10 = SPACER (S0756) (23.5mm long – double stepped) (x1).
ITEM 11 = SPACER (S0757) (3mm long – 8.2mm ID) (x1). *** FOR 1199 '12-'13 & 899 '13- ***
ITEM 12 = RIGHT MOUNTING PLATE REAR (M0383 Welded Assembly) (x1).
ITEM 13 = RIGHT MOUNTING PLATE FRONT (M0384) (x1).
ITEM 14 = SPACER (S0735) (41.5mm long) (x1).
ITEM 15 = M6x70mm LONG BUTTON HEAD BOLT (x2).
ITEM 16 = SPACER (S0739) (31mm long) (x1).
ITEM 17 = CRASH PROTECTOR (B0431 with CS340) (x2).
ITEM 18 = CRASH PROTECTOR CAPS (BC0002) (x2).
ITEM 19 = SPACER (S0738) (72mm long) (x1).
ITEM 20 = M8x25mm LONG BUTTON HEAD BOLTS (x2).
ITEM 21 = LEFT MOUNTING PLATE (M0382 Welded Assembly) (x1).
ITEM 22 = M8x30mm LONG BUTTON HEAD BOLT (x1).
ITEM 23 = EB077 ENGINE BAR (252.5mm long) (x1).
ITEM 24 = SPACER (S0736) (6.5mm long) (x1).
ITEM 25 = SPACER (S0670) (9mm long) (x1).
ITEM 26 = M6x35mm LONG BUTTON HEAD BOLT (x1).
ITEM 27 = M12x1.25x130mm LONG HEX HEAD BOLT (x1).
ITEM 28 = M6 WASHERS (x2).
ITEM 29 = M6 STAINLESS NUT (x1).
ITEM 30 = M10 x 1.25 x 50mm LONG 10.9 GRADE CAP HEAD BOLT (x1).
ITEM 31 = LEFT BRACE PLATE (MP0116) (x1).
ITEM 32 = SPACER (S0793) (40mm long) (x1).
ITEM 33 = SPACER (S0794) (36.5mm long) (x1).
ITEM 34 = SPACER (S0795) (35mm long) (x1).
ITEM 35 = RIGHT BRACE PLATE (MP0117) (x1).
Please note that in cases where kits are packed with rubber washers holding the components onto the bolt – the
rubber washers should be thrown away!
TOOLS REQUIRED
Socket set to include 2.5, 3, 4, 5, 6, 7 & 8mm A/F socket and wrench.
Socket set to include a deep 8mm & 19mm socket and wrench.
8 & 10mm spanner.
Flat headed screwdriver.
Torque wrench (up to 40Nm).
Suitable centre lift stand to support the chassis during rear suspension removal.
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
www.rg-racing.com
Email:
info@rg-racing.com
Publicité
