Publicité
LEGEND
ITEM 1 = OEM TAIL UNIT (FOR ILLUSTRATION ONLY; NOT INCLUDED IN THE KIT)
ITEM 2 = M6 WASHERS (x6)
ITEM 3 = LEFT HAND SUPPORT BRACKET (TB0202 PART 2) (x1).
ITEM 4 = RIGHT HAND SUPPORT BRACKET (TB0202 PART 3) (x1).
ITEM 5 = RUBBER GROMMETS (RB-80-30-00) (x2)
ITEM 6 = 5mm SPACER (S0967) (x1)
ITEM 7 = 8mm SPACER (S0968) (x1)
ITEM 8 = LICENCE PLATE BRACKET (TB0202 PART 1) (x1)
ITEM 9 = LICENCE PLATE ILLUMINATOR (LA0002) (x1)
ITEM 10 = LICENCE PLATE ILLUMINATOR SHROUD (x1)
ITEM 11 = M6 x 20mm LONG BUTTON HEAD BOLTS (x2)
ITEM 12 = M6 x 25mm LONG BUTTON HEAD BOLTS (x2)
ITEM 12 = RUBBER GROMMETS (RB-80-30-00) (x2)
ITEM 13 = 100mm HEAT SHRINK TUBES (x3)
ITEM 14 = BULLET CONNECTORS (CON0004) (1 SET)
ITEM 15 = INDICATOR CONNECTORS (CON0014) (x2)
ITEM 16 = 220mm CABLE TIES (x3)
ITEM 17 = REFLECTOR (x1)
Please note that in cases where kits are packed with rubber washers holding the components onto
the bolt – the rubber washers should be thrown away!
PICTURE
Page | 2
TOOLS REQUIRED
Set of metric Allen keys.
Electrical pliers/crimps.
T15 Torx key
Metric socket set and a wrench.
13mm Spanner.
Small amount of super glue.
1
2
PICTURE
Publicité
