Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Thigh Pad Adjustment (Fig.16.3-16.5)
These pads enable you to sit the client in an abducted
position which can help to lower muscle tone, create a
wider sitting base and maintain the hips in a good
position.
Inner Thigh Pad Fitting & Adjustment
•
To fit the inner thigh pads, Screws A complete with
Washers B should be inserted through the carrier plate
and into the dedicated holes on the underside of the
Seating Unit.
•
Tighten each screw using the 4mm allen Key provided.
•
Once held on (but not fully locked off) you can continue
to set the other adjustment.
Abducting the legs
•
With Screws A still loose, rotate the inner thigh pad to
the desired position.
•
Once attained, lock off screws using the 4mm Allen
Key provided.
Flip Down the Inner Thigh Pad (To facilitate Transfers)
•
Press and Hold Button C, whilst flipping down the inner
thigh pad.
•
To reengage the inner thigh pad, simply rotate back up
and into place until it latches securely.
Outer Thigh Pad Fitting & Adjustment
•
To fit the outer thigh pads, Screws A complete with
Washers B should be inserted through metal adductor
bracket into the dedicated holes on the plastic carrier
plate.
•
Tighten each screw using the 4mm Allen Key provided.
•
Once held on (but not fully locked off) you can continue
to set the other adjustment.
Adducting the Legs / Setting Channel Width
•
With Screws A still loose, slide the outer thigh pad
along it fixing slot to the desired position.
•
Once attained lock off screws using the 4mm Allen Key
provided.
22
Fig.16.3
C
Fig.16.4
A
B
Fig.16.5
A
B
Pluton Rev.2.0
Publicité
Chapitres
Table des Matières
