Tilt In Space; Multi Height & Tilt Base (Fig.10.1-10.3); Folding Push Handle; Multi Height And Tilt Base (Fig.11.1-11.2) - Zippie Pluton 1 Notice D'utilisation

10.0 Tilt In Space

Multi Height & Tilt Base (Fig.10.1-10.3)
WARNING!
Always ensure the base is stable and that the brakes are
applied before performing the following adjustments.
• Release the locking mechanism on the handle by
squeezing the small latch (A) up on the handle.
• To Recline:
Use one hand to squeeze handle (B) and push down
the chair handle, at the same time use the other hand
positioned on the chair arm or side to help guide the
chair into the recline position.
• To put into Prone:
Squeeze handle (B) and pull the chair handle upwards
and forwards. At the same time use the other hand
positioned on the chair arm or side to help guide the
chair into the prone position.
• Once in position release handle
(B) to lock the tilt mechanism.
• Ensure that the latch (A) on the handle moves back
into a closed position, this ensures the tilt position is
locked in place.
WARNING!
The operator should control the motion of the chair while
the squeeze handle is engaged. The amount of support
required will vary with the size and weight of the user. We
recommend practicing this operation on first use before
placing the client in the chair.

11.0 Folding Push Handle

Multi Height and Tilt Base (Fig.11.1-11.2)

Only use the push handle to move the chair. The push
handle should be folded down when not in use.
Depress both buttons (C) on the inside of the handle.
Manually alter the position of the handle by pushing the
top section down.
To unfold pull the handle up until you hear a click
ensuring it is in place.
Pluton Rev.2.0
Fig.10.1
A
Fig.10.3
C
Fig.11.1
B
Fig.10.2
A
Fig.11.2
17