Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
16.0 Pad Adjustment
Sacral Pad Adjustment (Fig.16.1)
Pad Height
•
Pull the cushioned pad away from the framework
•
Loosen the allen key bolts (A) on both sides of the
sacral pad (2 altogether).
•
Move the pad up or down within the adjustment slot.
•
Once in place tighten the bolts to secure.
Pad Angle & Depth
•
Loosen Locking Bolt B by one full turn using the 4mm
Allen Key Provided (Ensure this is complete for both
left and right fixings)
•
The Sacral Pad can now be freely moved for angle
and fore & aft position.
•
Set the desired position and then re-lock the fixing
screws to secure the pad in place.
•
Note: The Sacral Pad can also facilitate a degree of
rotational adjustment – To achieve this you should
adjust the fore & aft position of left & right sides
independently.
Hip Pad Adjustment (Fig.16.2)
Hip Pad Width
•
Loosen Locking Bolt A by one full turn using the 4mm
Allen Key Provided
•
The Hip Pad can now be freely moved along the width
adjustment rail B.
•
Set the desired position and then re-lock the fixing
screw to secure the pad in place.
Hip Pad Angle (Where Fitted)
•
To set the angle of the pad you should loosen the
securing handwheel C by rotating a couple of turns in
an anti-clockwise motion.
•
Once released the pads can be positioned by pressing
down on the handwheel whilst simultaneously altering
the angle of the pad using your other hand.
•
Once the desired position has been achieved you
should release the handwheel and re secure it by
turning in a clockwise direction until hand tight.
CAUTION!
Pad Angle – As an Alternative you can position the pad
without pressing down the handwheel, though this has
potential to shorten the life of the locking mechanism and
is therefore not recommended.
Pluton Rev.2.0
Fig.16.1
A
Fig.16.2
B
C
B
A
21
Publicité
Chapitres
Table des Matières
