Removal; Manual Seat Height Adjustment; Powered Base Height Adjustment - Zippie Pluton 1 Notice D'utilisation

Removal

Release index plunger (C) which is underneath the
interface plate and slide seat forward to remove it from the
base, (Fig.9.5-9.6).

Manual Seat Height Adjustment

Multi height & tilt base
The multi height and tilt base caters for all sizes of Pluton.
It is controlled by a hydraulic pump mechanism.
To Raise The Chair, (Fig.9.7).
Pump the foot pedal several times until the desired height
is reached. (The chair will raise with each pump.)
To Lower The Chair, (Fig.9.8).
Place your foot under the pedal and gently lift the pedal
up. (The chair will automatically lower).

Powered Base Height Adjustment

Upgrade option, (Fig.9.9).
CAUTION!
Always ensure that adjustment mechanism is free
from obstruction before operating this chair.
Button A = UP
Button B = DOWN
16
Fig.9.5
Fig.9.6
Fig.9.7
A
B
C
Fig.9.8
Fig.9.9
Pluton Rev.2.0