Turning The Power On/Off; Power-On Sequence For Connected Devices - Yamaha mLAN8P Mode D'emploi

Connections
(7) Connecting a pair of headphones
Connect a pair of headphones to the PHONES jacks on the front panel of the mLAN8P to monitor
the signal output at ANALOG OUT 1/L and 2/R (Stereo Mix).
PHONES

Turning the Power On/Off

Power-On Sequence for Connected Devices

When you finish connecting the mLAN8P and necessary devices, make sure that the volume level
of the mLAN8P and the audio equipment is set to minimum (0), then turn on the power to the
MIDI transmit device, MIDI receive device, and audio equipment (mixer, then amplifier) in this
order. To turn off the power to the devices, first lower the level of the audio equipment, then
reverse this order. If the devices are connected via mLAN, you do not have to follow the order of
turning the power on and off.
15