Yamaha mLAN8P Mode D'emploi page 30

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Mode Functions
[MIDI In Plug]
Select a "Plug" (that sends out the MIDI signal) from the mLAN Plugs (virtual plugs) on the
selected device. If the device does not have an appropriate mLAN Plug, "No Source (Destina-
tion) Plug" appears.
NOTE
B
[MIDI/UTILITY] - [OUT-A/B]
You can route the MIDI signals from any channel on the mLAN to the device connected to the
MIDI OUT A/B terminal on the rear panel of the mLAN8P.
[MIDI Out A/B Device/Nickname]
Use the [Device/Nickname] parameter to specify the name of the device (on the mLAN) that
outputs MIDI signals to the MIDI OUT A/B terminals of the mLAN8P. If you are not connecting
any devices, select "Unconnected."
[MIDI Out A/B Plug]
Select a "Plug" (that sends out the MIDI signal) from the mLAN Plugs (virtual plugs) on the
selected device. If the device does not have an appropriate mLAN Plug, "No Source (Destina-
tion) Plug" appears.
30
You can select multiple destinations. If multiple devices are connected to the
network, the [Device/Nickname] and [Plug] parameter screens indicate the
number of connected devices in the lower left corner of the display. When
you press the [PAGE
parameter setting changes accordingly.
] button repeatedly, this number increments and the

Publicité

Table des Matières
loading

Table des Matières