Yamaha mLAN8P Mode D'emploi page 35

[mLAN8P Set Root]
This parameter is used to assign the mLAN8P as the root of the mLAN.
Press the [+1/ENTER] button to display the screen to confirm the setting.
Press the [+1/ENTER] button again to specify the mLAN8P as the root.
Press the [–1/EXIT] button to exit the screen without making any changes.
[Net Traffic]
This screen indicates the amount of data being handled on the mLAN by a percentage and a
graph.
[Factory Set]
This parameter enables you to reset the settings on the mLAN8P to its factory default settings.
Press the [+1/ENTER] button to display the screen to confirm the setting.
Press the [+1/ENTER] button again to specify the mLAN8P as the root.
Press the [–1/EXIT] button to exit the screen without making any changes.
NOTE
The Nickname setting will not be reset to the factory default.
[Confirmation]
This parameter is used to set the requirement for connecting the mLAN8P and I/O signals.
Value: On, Off
When it is On, the connection is made when you confirm the destination.
When it is Off, the connection is made when you select the destination.
Mode Functions
35