Yamaha mLAN8P Mode D'emploi page 26

Mode Functions
[Aux 1/2]
This parameter enables you to set the volume level of the input audio signal that is sent to
AUX 1 and 2. The signal sent to AUX 1 and 2 can be assigned to any channel on the mLAN.
Value: – ∞ dB (minimum send level) - +6 dB (maximum send level)
[Ch (Channel On/Off)]
This parameter turns channels On and Off. With the Off setting, the corresponding channels
will be muted.
Value: On, Off
[Pan/Balance]
This parameter enables you to set the stereo image of each channel. When you raise the L
value, the stereo position shifts to left. When you raise the R value, the stereo position shifts to
right.
If the Link Switch is turned On, this parameter becomes the Balance parameter and both odd
and even channels have the same value.
Value: L63 - R63 (for both Pan and Balance)
When the Link Switch is turned On:
[Level]
This parameter enables you to set the volume level of the input signal that is sent to the out-
put.
Value: – ∞ dB (minimum send level) - 0 dB (maximum send level)
26