Settings Menu - Spypoint LIVE Manuel De L'utilisateur

12

SETTINGS MENU

Allows the user to set the advanced settings of the camera. To
configure the system in another language, press the "DOWN"
button until the option "Language" is highlighted. Press "OK" and
modify the selection with "UP" or "DOWN" button. Confirm the
choice by pressing "OK". The system will change all the menus in
the selected language.
When selected, some options affect the behaviour of other
options from the list of the settings menu. In this case, the
selected option is displayed in yellow and options affected are
shown in gray.
Date: Set the date as Year/Month/Day
Time:
Set the time as Hour/Minute/Second
Note: The seconds are not printed on the pictures
when "Stamp" option is activated.
Time format: Allows the user to choose between a 12 or
(12h/24h)
24 hours period time displays on the photos.
(eg. 6:00 pm or 18:00)
Delay: Sets the time interval to wait between each
(10sec/1min/3min/
detection before the camera records the next
5min/10min/
photo or video.
15min/30min)
Additional setting: it is possible to decrease the
delay between detections to 10 seconds (instead
of 1 minute) by using the following procedure.
Note that the battery life will be affected.
Turn OFF the camera. Press and hold the "
button and turn the camera ON . "10sec enabled"
appears on the screen meaning the minimum
delay is now 10 seconds. To reset the camera to 1
minute delay, follow the same procedure. "10sec
disabled" appears on the screen (see figure
below)
10SEC ENABLED
10 sec delay
Video length: Sets the recording time of video in "VIDEO"
(10s/30s/60s/90s)
mode.
Multi-shot:
Allows the camera to take several consecutive
(1/2/3/4/5/6
shots at each detection with a 10 second delay
consecutive shots)
between each photo.
13
UP
"
10SEC DISABLED
1 min delay