Spypoint LIVE Manuel De L'utilisateur page 10

18
When "Security" mode is activated, the
operation is the same as in "Cellular" mode,
except:
• The camera makes a self check every minute
to verify if images have been taken. If so, the
camera will transmit to the
user's account.
• The
mySPYPOINT
presets of the options "Synchronize" and
"Synchronize at".
• The "Multi-shot" speed is improved with a 5
seconds delay between each take.
• If the option "Multi-shot" is enabled, the
transmission is performed once the serie of
photos is recorded.
• The option
mySPYPOINT
can be activated via
(see "SMS Configuration" for details).
Note: Security mode is recommended for use
in areas where detections are rare and where the
camera can't be powered of a main electricity
supply. It is a good compromise between security
and battery life.
Carrier: This setting must correspond with the user's
service provider. Choose the one corresponding
to the SIM card among the list of compatible
providers.
Synchronize: Sets the daily number of synchronisations
(1/2/6/12 times
between the camera and the server.
a day)
This option changes the frequency at which the
camera communicates with the
server in order to update its status or to send
photos on the user's account.
mySPYPOINT
camera still communicates
server following
"Security Alert" is available on the
user's account. This option
mySPYPOINT
mySPYPOINT
Synchronize
at:
with
the
Transmit
only
format:
(Thumbnails/
Large)
Continuous:
(Yes/No)
Defines at what time of day the camera
mySPYPOINT
communicates with the
server in order to update its status or
to send photos on the user's
(Over a period of 24 hours)
e.g.1: The option "Synchronize at" is set to 8:00
and the option "Synchronize" is set to 6/day.
The camera performs 6 synchronisations per day
and begins its first transfer at 4h, then at 8h, 12h,
16h, 20h and 24h.
e.g.2: The option "Synchronize at" is set to 13:00
and the option "Synchronize" is set to 2/day.
The camera performs 2 synchronisations per day
and begins its first transfer at 1h, then at 13h.
mySPYPOINT
Sets the photo size sent to the
user's account.
Thumbnails: 160x120 pixels
Large: 640x480 pixels
Note: It is recommended to use the format
"Thumbnails", since many more photos can be
mySPYPOINT
sent on the
in that format and thus, reduce the amount of
cellular data transmitted. The user can still, from
his account, choose among his "Thumbnails"
format photos which ones he wants to receive in
"Large" format in the next synchronisation of the
camera.
Note: If the camera is configured with the power
option "Electricity", the selected photos will
be transferred in "Large" format at the next
synchronisation.
Allows the camera to operate in continuous
mode. When there is no more space available on
the memory card to record photo or video, the
camera continues to record by erasing the oldest
files and by replacing them with newest ones.
19
account.
user's account