Spypoint LIVE Manuel De L'utilisateur page 9

16
Power: Allows the user to select the type of power supply.
(Batteries/
Electricity)
Choose "Electricity" if the camera is powered
of a main electric supply. (using a 12 volt DC
adapter AD-12V, sold separately). Main electric
supply is recommended for security purposes. It
provides an instant trigger time when a movement
is detected. We recommend that you remove the
AA batteries when this power supply is used.
Although, lithium battery pack can remain safely
inside the camera and it is ideal in case of a
blackout. A 12 volt DC adapter that can provide a
minimum of 800 mA is required
(See "Options" for accessories).
When the option "Electricity" is enabled:
• The option "Delay" is reduced and locked to 2
seconds to speed up the photo shooting.
• The "Multi-shot" speed is improved with a 2
seconds delay between each take.
• The option "Time Lapse" is disabled
• The option "Synchronize" is locked on
"Permanent"
pictures at every synchronisation.
• The option "Synchronize at" is ignored.
• If the option "Multi-shot" is enabled, the
transmission is performed once the series of
photos is recorded.
• The camera is synchronized with the server
every 10 min. and uses an average of 1.4Mb of
data per day excluding the weight of pictures
transmitted during this period.
• The viewing screen may light up momentarily
during synchronizations.
Language: Sets the display language of the camera's menus.
(English/Français)
to allow the transmission of
Mode: Sets the operating mode of the camera.
(Standalone/
Cellular/Security)
When "Standalone" mode is activated:
• The camera operates normally by recording
photos or videos locally on the memory card.
• The options
"Synchronize",
"Transmit format" are disabled since no
cellular communication is performed in this
mode.
• The presets of the "Time Lapse" option are
reduced to 15s/30s/1min/5min/10min/30min/
1h/2h. (See the option "Time Lapse")
When "Cellular" mode is activated:
(A subscription to
visit www.myspypoint.com for details)
• The camera
transmission mode and communicates with
mySPYPOINT
presets of the options "Synchronize" and
"Synchronize at".
• Videos cannot be sent to the
user's account.
• Photos are also stored locally on the memory
card.
Note: In Cellular mode, it is recommended to
use an external 12 volt input (BATT-12/KIT-
12V/AD-12V, sold separately) in order to get
best results and longer battery life (see "Power
Supply" for details).
"Theft alert", "Carrier",
"Synchronize at" and
mySPYPOINT
is required,
operates in cellular
server following the
mySPYPOINT
17