Remove mulch kit
1. Lift the impact protection (21) .
2. Push in the bracket (26a)
3. Remove the mulch kit (26).
Lateral grass ejection
Before using the lateral grass
ejection, the mulch kit (
has to be inserted and the grass
collection box (
removed.
Install lateral ejection canal
1. Pull the locking element (16a)
on the impact protection (16) to
the left.
2. Lift the impact protection (16) on
the lateral ejection.
3. Hook in the lateral ejection chu-
te (27).
4. Place the impact protection (16)
on the lateral ejection.
The impact protection holds the
lateral ejection chute (27) in
position.
Filling with engine oil
Warning! Engine oil is harmful to
health and the environment.
Check the oil level every time befo-
re mowing and add oil before
the lower marking point is reached.
Place the device on a stable, level
floor.
26)
22) has to be
1. Screw off the oil tank cap with
dipstick (17).
2. Fill the engine oil in the oil tank.
The engine oil tank holds 0.4 l
of oil. Use brand-name oil.
3. Close the oil tank cap (17) again.
Checking the oil level
1. Screw off the oil tank cap with
dipstick(
2. Wipe the dipstick using a clean
cloth.
3. Return the oil tank cap with dip-
stick (17) back in the oil tank as
far as it will go.
4. After removing the dipstick (17),
read the oil level.
The oil level must be in
the marked field bet-
ween the minimum and
maximum mark (maxi-
mum: 0.4 l engine oil in
the oil tank).
5. Close the oil tank cap
(17) again.
6. Wipe away any spilt engine oil.
Filling with petrol
Warning! Petrol is flammable, an ir-
ritant and harmful to health and the
environment.
Warning! Petrol is flammable
and hazardous to health:
- Keep petrol in containers in-
tended for this purpose;
- Only refuel outdoors and never
with the engine running or when
the machine is hot;
GB
17).
119