Repair Service; Maintenance Intervals - Grizzly Tools BRM 5117-2 A 4in1 Set Traduction De La Notice D'utilisation Originale

GB
riod for the equipment or any replace-
ment parts installed as a result of
this work. This also applies if on-site
service is used.
• Defective units returned to us will be
disposed of for free.

Repair service

• In case of a justified warranty claim,
we ask you to call our service centre.
You will receive more information on
complaint processing here.
Please do not send any devices to our
service workshops before coordinating
this on the telephone, as otherwise you
may be charged costs for refusal.
Caution: Never ship a defective device
•
with a filled fuel or oil tank. It is essen-
tial that you empty the fuel tank. Any
Table maintenance intervals
Maintenance Work
(See "cleaning and mainte-
nance")
Check and tighten screws,
nuts and bolts
Check the engine oil level /
petrol level and refill with en-
gine oil / petrol if required
Clean operating elements /
the area around the silencer
Clean the finger protection
Change the engine oil
Replace the air filter
Clean/adjust the spark plug
Replace the spark plug
Check the silencer and spark
catcher
Clean the air cooling system
Clean more often if there is a high level of dust or heavy dirt
a
126
Before


a
a
property damage (oil/petrol might leak,
if device is placed on the side or upside
down!) or fire damage during transport
shall be borne by the consignor.
• Device repairs or exchange do not ex-
tend the warranty time or begin a new
warranty period for the device or any
installed spare parts. This also applies
for on-site services.
• Disposal of your sent in defective de-
vices is carried out free of charge.

Maintenance intervals

Regularly carry out the maintenance work
listed in the "maintenance intervals" table.
Regular maintenance prolongs the life of
the equipment. It also gives optimum cut-
ting performance and avoids accidents.
After
After
1
st
Work
Hrs.


After After
5
8 Hrs. 50 Hrs.






Annual




